DIY Ideas – ToAuto Metal Studio

DIY Ideas RSS

  When welding, the hands need be stable state, and the arms must be clamped to avoid shaking, so that the welding can be uniform and beautiful. 2. When welding, zigzag and dot type are generally used for welding, so that the welded seam lines are clearer. When welding, the electrode and the iron plate should maintain an angle of 45 degrees, which is conducive to the uniform distribution of molten iron, and the welding after burning is smooth. During the overhead welding operation, since the molten iron is easy to fall, it is necessary to adopt the form of...

Read more

Making your own cowstyle candle at home   Earlier I posted the cowstyle candel and was asked how to pour it. Today I share the process here. Hope this will help :-) Enjoy! Cowstyle candle Things I used: Wax melter (I use a ToAuto wax melter) A cube mold Wax(I used 70g beanwax and 70g bee wax) Pigment: black essential oil:8ml cotton thread (depends on the mold size) Some sulfuric acid paper Hot air blower Ok, let's get started! Melt the wax Pour out some wax, and add black pigment (add enough untill the wax liquid turns black) Apply some black...

Read more

To start wood burning, please follow below steps:

1. You should practice using a burning pen to burn points, lines and then surfaces on a wooden board. So you will know the function of each part of the tip when burning points, lines and surfaces. After practicing for several times, you will master the strength to use when the burning tip touches the board in all directions. You will gradually know the performance of the burning pen and achieve better burning results.

Read more